Table of Contents
Advertisement
Notice
Indicates points that you must observe in
order to prevent product failure, damage or
malfunction and data loss.
Power supply
• If you plan not to use this product for a long
period of time, remove the power cord plug
from the AC outlet. Even when A (Power) on
the front panel is turned off, a small amount of
current still flows through this product.
Installation
• Do not use this unit in a location that is exposed
to direct sunlight that becomes extremely hot,
such as near a heater, or extremely cold, or that
is subject to excessive dust or vibration. Failure
to observe this may cause the unit's panel to
become deformed, the internal components to
malfunction, or for operation to become
unstable.
Connections
• If connecting external units, be sure to
thoroughly read the manual for each unit and
connect them in accordance with the
instructions.
Failure to properly handle a unit in accordance
with the instructions could cause malfunctions.
6
En
Handling
• Do not place vinyl, plastic, or rubber products
on this unit. Failure to observe this may cause
discoloration or deformation in the panel of this
unit.
• If the ambient temperature changes drastically
(such as during unit transportation or under
rapid heating or cooling) and there is a chance
condensation may have formed in the unit,
leave the unit for several hours without turning
on the power until it is completely dry before
use. Using the unit while there is condensation
can cause malfunctions.
Maintenance
• When cleaning the unit, use a dry, soft cloth.
Using chemicals such as benzine or thinner,
cleaning agents, or chemical scrubbing cloths
can cause discoloration or deformation.
Disposal or transfer
• If you plan to transfer ownership of this product,
include this document and the supplied
accessories along with the product.
• Follow the rules of your local authority to
dispose of this product and its accessories.
• Be sure to discard used batteries in
accordance with local regulations.
CAUTION—Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
(504-M01 FDA laser 01)
Advertisement
Table of Contents
