Advertisement
Reading with the
DataMate MP
Manual Mode
Connections
VW Temperature Sensor, 2012/6/20
The DataMate MP allows you to choose engineering units for your
readings. However, for ease of data reduction, we recommend that you
record readings in Hz. See the DataMate MP manual for directions on
programming.
Connect the DataMate to the sensor (see connection table below).
1.
Switch on. Press
2.
Scroll through the list to find "Vibrating Wire Hz. "
3.
Press
to excite the sensor and display a VW reading in Hz and a
4.
RTD reading in degrees C. Note that another setting will show read-
ings for thermistors.
The DataMate jumper cable has a universal connector that connects
directly to a universal terminal box or to signal cables that are termi-
nated with a universal connector. A bare-wire adapter (BWA) is also
supplied with the DataMate. It allows connection to wires of the signal
cable as shown below:
Terminals on BWA
or Terminal Box
5
Blue
6
White & Orange
7
White & Blue
8
Orange
10
Shield
(Manual Mode).
Wire Colors
White
Black
Green
Red
Shield
Function
RTD/Therm
VW
RTD/Therm
VW
Shield
4
Advertisement
