Menu Operation; How To Navigate Menus; Configuring The Channel Menu - Changhong Electric 4500 Series Operation Manual

Menu Operation

How to Navigate Menus

Before using the TV follow the steps below to learn how to navigate the menu in order to
select and adjust different functions. The access step may differ depending on the
selected menu.
1. Press the MENU button to display the main menu.
2. Press the◄/►button to cycle through the main menu. Press the ENTER button to
access the submenu.
3. Press the▲/▼button to select the desired sub item, then press the ENTER button.
4. Press the ▲/▼/◄/► button to select the desired value. To save the setting, press
ENTER. The adjustment in the OSD may differ depending on the selected menu.
5. Press the MENU button to return to the previous menu.
6. Press the EXIT button exit from the menu.
NOTE:
• When an item in MENU is displayed gray, it means that the item is not available or
cannot be adjusted.
• Buttons on the TV have the same function as corresponding buttons on the remote
control. If your remote control is lost or couldn't work, you may use the buttons on the
TV to select menus. This manual focuses on operation of the remote control.

Configuring the Channel Menu

■ Auto Tuning：Select the ENTER button to start Auto
Tuning.
1. Select the tune type and country for channels.
2. The TV will begin memorizing all of the available
channels.
Once the progress bar is full, the found channels will
be stored and the unit will proceed to the search for
TV, DTV and Radio.
If you press the MENU button in TV searching, the
Channel Tuning will skip to DTV searching as the
suggestive picture shows.
■ DTV Manual Tuning: Manual store for digital
channels.
1. Press the ◄/►button to select channel.
2. Press the ENTER button to search.
When a channel is found, the searching process will
stop, the channel will be saved with current channel number.
English15