> Ca A=)
1. DISASSEMBLY
Note: Always use new washer and E washer at the time of
;
reassembling.
S
Arm
Unit
¢ Dismounting the Cassette Holder
Sorin
;
es
1. Remove the three springs.
prin py A
xs
2. Take off E washer, and then remove the arm unit.
Claw
3. Make the claw straight.
{
4. Shift the cassette holder toward the left and pull it out from
above.
Fig. 1
¢ Dismounting the Head Unit
Guide
Assy
1. Remove the two screws, and then remove the guide assy.
.
2. Remove the two screws, and then remove the head unit.
* Dismounting the Pinch Roller Unit
1. Remove the spring
and then remove the
pinch roller unit
si
Pinch Roller Unit
y7 Pinch Roller Unit
(REV)
SiN;
CAD
3
|?
Head
Unit
Fig. 2
¢ Dismounting the Gear (Reel Base)
1. Remove the two screws, and then remove the cover.
2. Remove the collar, and then remove the spring and gear.
When removing the collar be careful not to damage the
claw on the inside of the collar.
Fig. 3