•
DO NOT attempt to operate the fan before assembling the base and standing the
fan upright.
•
Join the two halves of the base plate by aligning the pins and pressing together so
they form one part with no gap between them.
•
Secure using the screws supplied.
•
Remove the handwheel on the bottom of the fan body.
•
Align the main body with the holes in the base and insert the mains cord through
the channel in the base and slide the body into position.
•
Refit the handwheel and tighten firmly to lock the assembly together.
•
Stand the fan upright on a level surface and ensure it stands securely.
OPERATION
•
Connect the mains plug to a suitable outlet.
•
Press one of the three buttons to select the fan speed 1, 2 or 3.
•
Press the oscillation button to start the oscillating motion of the fan. Press again to
stop.
•
Press the OFF button to switch off the fan.
Timer Function
•
To set the timer duration turn the timer control
clockwise to set between 10 minutes and up to
2 hours duration.
•
The fan will turn off automatically at the end of
the timed period.
CLEANING & MAINTENANCE
•
Before cleaning, switch the fan off and unplug from the power supply.
•
To clean the fan, use a soft cloth to wipe off any dust. If the fan is very dirty, use a
damp cloth with some mild detergent then wipe dry.
•
Do not use any chemicals, abrasives or solvents that could damage the fan.
•
Keep the air vents at the rear of the main body free from dust or fluff - use a
vacuum cleaner to clear these when necessary.
Speed control
Oscillation On/Off
Timer control