Table of Contents
Advertisement
CD OPERATION
Basic operation
1 Press
POWER
button to turn on the power.
2. Open the CD door, then load the Disc with the label side
up and press it onto the spindle until it "CLICKS " on the
central support of the compartment. Close the door.
OPEN
LOAD
CLOSE
Step 1 - Push the CD door open button to open CD door.
Step 2 - Loading disc as shown.
Step 3 - Be sure that disc is located in proper position.
Step 4 - Push CD door close
3 The disc will spin and the unit will read and display the
number of tracks and the total recorded time. Press the
play/pause button once. The display will show the first
track number on the disc, then indicate the elapsed time
as shown below, and play will start.
TRACK
0 I
TRACK
0 1
0 0:0 8
-
4. If there is no disc in the CD compartment and the CD
button is pressed, the LCD will show "no disc."
no
disc
5. Adjust the VOLUME control to a comfortable level.
6. Press and release the
CD-TUNING-SKIP
+ or - button
to skip to the desired track.
7. Press and hold the
CD-TUNING-SKIP
+ or - button to
search for the desired section within a track.
8. Press the Ml
button to pause temporarily. The LCD
will appear as shown below:
TRACK
\
\
1
/
/
0 1
-0 0:0 8
-
7-
1
-1-\-1
PressMI again to resume.
9. Press the
STOP
button to stop playing. The display will
show the total number of tracks and the playing time of
the disc.
TRACK
12
4 5:0 8
-
11
-
Advertisement
Table of Contents
