Oscillator Frequency - Kenwood TS-900 Operating Manual

The trimmers, like the coils, are arranged (right to left)
from WWV, 3.5, up to 29.5 MHz.
TABLE 7. Heterodyne Oscillation Alignment Frequencies
29.0 MHz
29.5 MHz
Frequency at TP 1
23.895 MHz
12.395 MHz
| 45.895 M H z
| 22.895 MHz
29.895 MHz
36.895 MHz
37.395 MHz
37.895 MHz
38.395 MHz
O0000000000
OO0O0000000000
O0OD0NDN0N0000000
OD0000000000
O00000000000 O0D0000000000
FIGURE 44. Final RF Section
6.3 CAR-AVR BOARD ADJUSTMENTS
ADJUSTING POWER VOLTAGE
The voltage can be adjusted from the top of the TS-900 or
by swinging
the CAR-AVR
board out
of the chassis as
described in Section
6.1. Keep the stand-by switch in the
REC position.
CARRIER OSCILLATOR FREQUENCY
6GKE
DRIVE COIL
Unit
Ter
HET osc
Unit
MIX COIL,
Unit.
FIGURE 45. DRIVE Board
35