Sony STR-DE475 Operating Instructions Manual page 49

Remote Button Operations Function
• CD player/ Stops play.
MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
DAT deck
POSITION** TV Changes the position of
the small picture.
SWAP** TV Swaps the small and the
large picture.
DISC CD player Select discs (Mega
storage CD player only).
SUB CH +/-** TV Selects preset channels
for the small picture.
D. SKIP/ Receiver Scans and selects preset
CH/PRESET +/- stations.
TV/VCR/SAT Selects preset channels.
CD player Skips discs (CD player
with multi disc changer
only).
DISPLAY TV/VCR/ Selects information
LD player/ displayed on the TV
DVD player/ screen.
VCD player
P IN P** TV Activates the picture in
picture function.
JUMP TV Toggles between the
previous and the current
channels.
WIDE TV Selects the wide picture
mode.
ANT TV/VTR VCR Selects output signal
from the aerial terminal:
TV signal or VCR
program.
TV/VIDEO TV/VCR Selects input signal: TV
input or video input.
A. F.D. Receiver Auto Format Decoding.
2CH/OFF Receiver Turns off sound field or
selects 2CH mode.
MODE +/- Receiver Selects sound field mode.
MULTI CH/ Receiver Selects MULTI CH IN
2 CH DIRECT source.
MUTING Receiver Mutes the sound from
the receiver.
TEST TONE Receiver Press to output test tone.
MAIN MENU Receiver Press this button
repeatedly to select one
of the two cursor
modes: LEVEL and
SURROUND.
Remote Button Operations Function
MASTER VOL Receiver Adjusts the master
+/- volume of the receiver.
MENU </> Receiver Selects a menu item.
MENU +/- Receiver Makes adjustment or
change the setting.
MENU DVD Displays DVD menu.
_/,5/<_/_> DVD Selects a menu item.
ENTER DVD Enters the selection.
RETURN DVD Returns to the previous
menu or exits the menu.
TITLE DVD Displays DVD title.
** Only for Sony TVs with the picture in picture function.
Notes
• Some functions explained in this section may not work
depending on the model of the receiver.
• The above explanation is intended to serve as an example only.
Therefore, depending on the component the above operation
may not be possible or may operate differently than described.
• The VIDEO 1, VIDEO 2, VIDEO 3, PHONO and AUX functions
are not available for set operation.
If the factory settings of the FUNCTION buttons don't
match your system components, you can change them.
For example, if you have an MD player and a tape deck
and you don't have a CD player, you can assign the CD/
SACD button to your tape deck.
Note that the settings of the TUNER and FN SHIFT
functions (VIDEO 1, VIDEO 2, VIDEO 3, PHONO and
MD/TAPE) cannot be changed.
I
Q.
Q.
m
fll
49