Advertisement
Switches & Controls
24. "B" Speaker Terminals-
1
23. "A" Speaker
28. FM Antenna Terminal
27. FM Antenna Terminal
26. AM External Antenna Terminj
30. TAPE-1 Monitor Terminal
—•
31
TAPE-2 REC. OUT Termini! —
32. TAPE-2 Monitor
(UNSWITCHED)
34.
1— 35. Ground Terminal
33. Phono Terminal
Aux Terminal
25.
AM Loop Stick Antenna
Normally, good reception of AM broadcasting is possible
with this antenna. Rotate this antenna to ensure the optimum
reproduction.
26. AM External Antenna Terminal
In case normal reception is possible with the loop stick
antenna, it is not necessary to use this terminal.
But when
reception of weak signals is desired, connect the exclusive out¬
door antenna to this terminal.
When simple wire antenna is
used for this terminal, it is not always necessary to have a
ground connection which sometimes deteriorates sensitivity.
The exclusive outdoor antenna is effective to reduce undesired
noises.
27.
FM Antenna Terminal (75 ohms)
Use this connector for FM antenna with 75 ohms coaxial
cable as lead-in wire. A coaxial cable can be easily connected —
a core wire to the 75 ohms Terminal and the sheathing wire to
the GND terminal.
28.
FM Antenna Terminal (300 ohms)
Connect to this terminal a T type (di-pole) antenna or
antenna feeder cable for TV (impedance 300 ohms) or FM
antenna with TV feeder cable used as a lead-in wire. Do not use
short wire on this terminal in place of the antenna, and always
connect the exclusive FM antenna.
29. TAPE-1 REC. OUT Terminal
Signal for recording is taken from this terminal, which is
always available as long as an input signal is given to any of the
Input Terminals (Phono, Aux, AM, FM) selected by the Input
Selector Switch except when the Tape Dubbing Switch is set
to the "2-1" position. In this case recording signals come from
the TAPE-2 Terminal.
30.
TAPE-1 Monitor Terminal
Playback of line-output of tape recorder is possible from this
terminal. For playback through this terminal press in the Tape
Monitor Switch, and set the Tape Selector Switch in the "pro¬
truded" position.
A 3-head tape recorder makes it possible to
monitor playback sound while recording.
31. TAPE-2 REC. OUT Terminal
This terminal functions in the same way as the TAPE-1 REC.
OUT Terminal. For playback through this terminal press in the
Tape Monitor Switch. A 3-head tape recorder makes it possible
to monitor playback sound while recording.
4
Advertisement
