Table of Contents
Advertisement
INSTALL FRONT PANEL (SOLD SEPARATELY)
1
2
3
4
16
Ensure the lower adjustment clip is
engaged on the outside of the drawer,
between the screw and the drawer.
Align the tabs on the panel to the chassis
and slot into place.
If required, adjust panel vertically
as needed.
Tighten the screw to secure.
ADJUSTING THE DEPTH
Applicable for 30" Vacuum seal drawer only. The depth of the front panel of the drawer can be
adjusted to align with the surrounding cabinetry.
1
2
Open the drawer fully.
Using a hex key, turn the adjustment
screw to move the front panel forward.
Turn clockwise to move backwards or
counterclockwise to move forwards.
The depth is adjustable within
3/16" (4mm).
Advertisement
Table of Contents
