Wiring Scheme - pro user SCP10 Operating Manual

1. Solar panel + positive input
2. Solar panel - negative input
3. Battery + positive output
4. Battery - negative output
5. Load + positive output
6. Load - negative output
7. Solar panel Charging LED – Flashes during charging, turns solid when fully charged. If
insufficent sun light the LED will not illiminate.
8. Battery voltage indicator.
9. Error warning LED – Green no issues, Red indicates a failure (see failures section for de-
tails).
10. Load output button, press to engage. Press again to disengage. If your battery voltages
drops to low the load will automactically disengage.
11. Load output LED – Green load output is on, Red is USB error.
12. USB output – 5VDC, 2.4Amp.
13. One of four mounting slots.

WIRING SCHEME

15A Fuse
15A Fuse
EXPLANATIONS
15A Fuse
Note: Use only a minimum of
18AWG / 0.75mm2 wire for all
connections
5
12V / 10A Output