Table of Contents
Advertisement
START
After loading the laundry,
place the washing powder and
additives into the appropriate
compartments. Before starting
up the machine, check that:
— the appliance is plugged in
— the water supply taps are
turned on
— the drain hose is correctly
and securely positioned
— the door and the washing
powder dispenser drawer are
closed.
If required, press the half
load
and/or
heavy
soil
button(s).
Select
the
required
programme by pressing and
turning the programme
dial
clockwise.
At this stage,
press the
«start/stop» button to start
the programme up.
The pilot light comes on
and the programme starts up.
When the programme has
finished, the programme dial
will be in the «b position and
the washing
machine
will
automatically stop.
If you
have
selected
a
programme
for synthetics,
mixed fabrics, silk or wool, the
water remaining in the wash tub
must be drained by running the
draining
programme
before
opening the door.
Open the door only at the
end of the programme when
the pilot light beside the door
catch goes out.
If necessary,
stop
the
machine
by pressing
the
«start/stop» button
again.
At' the
end
of
the
programme,
all the
buttons
should be reset, to the «rest»
position (not depressed).
[THE
WASHING
PROGRAMMES
This washing machine has
a wide range of programmes
for optimum washing of all
types of fabrics.
The differences
between
the
programmes
are
the
rotation rhythm of the drum,
the
washing
temperature,
the water level, use or not of
the spin cycle etc.
Three
special
programmes
are included in this washing
machine;
«worn
once»
is for
very lightly soiled garments,
giving a gentle, cool wash.
«Hand rinses» is intended as a
special rinse cycle to use after
laundry has been washed by
hand. «Freshen up» is a single
rinse cycle to use for unsoiled
laundry that may, for example,
need rinsing to remove a stale
smell,
or
to revive
badly
creased dry laundry.
Advertisement
Table of Contents
