Download Print this page
WARRIOR 58999 Owner's Manual & Safety Instructions

WARRIOR 58999 Owner's Manual & Safety Instructions

80 pc. rotary tool kit

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
80 PC. ROTARY
TOOL KIT
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this
product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.
24a
58999

Advertisement

loading
Need help?

Need help?

Do you have a question about the 58999 and is the answer not in the manual?

Questions and answers

Summary of Contents for WARRIOR 58999

  • Page 1 80 PC. ROTARY TOOL KIT Visit our website at: http://www.harborfreight.com 58999 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
  • Page 2: Table Of Contents

    2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 58999...
  • Page 3: Safety

    It must be understood by the operator that dust collection can reduce dust‑related hazards. common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Item 58999 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 The dust mask or respirator excessively and may cause loss of control. must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss. Page 4 For technical questions, please call 1-888-866-5797. Item 58999...
  • Page 5 When a rotary file, high-speed cutter or kickback forces, if proper precautions are taken. tungsten carbide cutter grabs, it may jump from the groove and you could lose control of the tool. Item 58999 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 If you feel any medical or vibration occurs, stop use immediately. physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Page 6 For technical questions, please call 1-888-866-5797. Item 58999...
  • Page 7: Specifications

    Tool Rating 12VDC / 0.7 A Adapter Rating 120VAC / 60 Hz No Load Speed n: 16000/min Collet Size 1mm, 3mm, 3/32″, and 1/8″ Maximum Accessory Diameter Ø1-1/4″ (Ø35  m m) Item 58999 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8: Setup

    • Carbide Burr Bit - For carving and Cut-off engraving wood, laminates, plastics, Wheel and non-ferrous metals. Mandrel • Drill Accessory - For boring small holes. • Dressing Stone - For dressing mounted stones. Page 8 For technical questions, please call 1-888-866-5797. Item 58999...
  • Page 9: Operation

    It may be very hot from use, possibly causing injury. Allow the accessory time to cool before handling it. 1. Press and hold Spindle Lock. 2. Loosen Collet Nut. Release Spindle Lock. Item 58999 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: Maintenance

    INJURY: If the supply cord of this power • any other condition that may tool is damaged, it must be replaced only affect its safe operation. by a qualified service technician. Page 10 For technical questions, please call 1-888-866-5797. Item 58999...
  • Page 11 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175530899 when ordering parts. Item 58999 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.