Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22b
Advertisement
Related Manuals for WARRIOR 58258
Summary of Contents for WARRIOR 58258
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Cluttered or dark areas invite accidents. Distractions can cause you to lose control. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools Page 2 For technical questions, please call 1-888-866-5797. Item 58258... -
Page 3: Safety
Power tools are dangerous in the hands of untrained users. Item 58258 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Page 4 For technical questions, please call 1-888-866-5797. Item 58258...
- Page 5 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Item 58258 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Specifications
120VAC / 60Hz / 5A No Load Speed : 0-3,000/min Cutting Angle 0 - 45° left and right Stroke Length 3/4" Blade Type T-shank Inside Diameter 1.4" Dust Port Outside Diameter 1.6" Page 6 For technical questions, please call 1-888-866-5797. Item 58258... -
Page 7: Setup
Functions Speed Dial Trigger Lock Trigger Power Blade Guard Cord Dust Shoe Port Orbital Action Switch Chuck Figure A Item 58258 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Operation
1. Loosen the Shoe by loosening the Angle Clamp Screw on the underside of the tool. See Figure D. 2. Tilt Shoe to the desired angle. 3. Tighten Angle Clamp Screw after adjustment. Figure D Page 8 For technical questions, please call 1-888-866-5797. Item 58258... - Page 9 Lock to lock the Trigger in its “ON” position. tool indoors out of children’s reach. To unlock the trigger lock, depress the Trigger Lock in the opposite direction to its “OFF” position. Item 58258 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Maintenance
INJURY: If the supply cord of this power tool is damaged, it must be replaced only • any other condition that may by a qualified service technician. affect its safe operation. Page 10 For technical questions, please call 1-888-866-5797. Item 58258... - Page 11 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Replacement parts are not available for this item. Refer to UPC 193175434814 . Item 58258 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 58258 and is the answer not in the manual?
Questions and answers