Advertisement
Turbo Function
Common key area (14) Each button can be switched and cycled between the following three
continuous transmission modes
Repeated message mode:
① Continuous transmission off (default) - LED light off state;
② Press a button in the common key area (14), and at the same time, press the serial
function button (8) to open the serial function of the button. After holding the button, the LED blinks,
indicating that the button is continuously triggered by holding the button;
③ Press and hold the button that has turned on the continuous transmission function, and
when pressing the continuous transmission function button (8), the automatic continuous
transmission function of the button is turned on - the LED is always blinking, which means that the
button has been triggered.
* Reinserting the USB cable or switching to a different compatibility mode can reset the
continuous messaging function to the default off state
Advertisement
