Panasonic F10 MARK II Operating Instructions Manual page 18

43. Fade-in/out Button (FADE) 45. Keyboard
This button can be used to fade-in or fade-out recordings Four push buttons are installed as follows:
for video and audio. :%
When the button is pressed the letter F is cisplayed in the
viewfinder,
The letter F indicates that the camera is ready for fade-in or
fade-out,
To start the fade-in or fade-out, press the VTR Start/Pause
Button (55).
To cancel the fade-in or fade-out before starting it, press 46.
Fade-in/out Button again.
44. Rec Review Button (REC REV)
When this camera is operated with Panasonic specified
portable VTR such as NV-180E, this function operates and
this button is only activated in the VTR''s pause (Record/
Pause) mode.
When this button is pressed after recording and the VTR is
in pause mode, the VTR automatically rewinds the tape for
quick review and plays back the tape for approximately 2
seconds and stops (Record/Pause) at the position of the end
of previous recording,
Recording Stop (Record/Pause) 47.
|
7
4
'
oo.
por
ee
is
"Playback Stop (Record/Pause)
Approx. 2 seca
49.
ee ican
BLACK _FAOE REG REV > o) @ maw Vf
48.
Blo)O cools
WHITE Tie — DATE NEGIROS — REC
rm
set — sFa — gi¢r ———__—_—_
—
Four buttons
Record/Playback Selection Switch (REC/PLAY)
This switch selects the function of the switches installed in
the keyboard panel and specified Panasonic portable VTR
such as NV-180E as follows.
REC: |Set to Rec/Pause Can be set or display
mode.
PLAY :| Set to Play/Pause No function at all
mode and PLAY,
FWD, REW, SLOW
can be controlled.
Tripod Mounting Hole
This is standard N.C. 1/4-inch,20-threaded hole for mount-
ing the camera on a tripod.
EVF Release Spring
When detaching the electronic viewfinder, depress this and
slide out the electronic viewfinder.
EVF Mounting Bracket Lock Screw
Fix the EVF
Mounting Bracket
onto the camera
head by
rotation this clockwise.