Advertisement
3. The thermostat will scroll through some diagnostics
and then display OFF, once you see the OFF displayed
then you can push the mode button and select heat or
cool and then set a temperature and the unit should be
operating in the selected mode.
DSA02NO General Functions
The MODE button, located in the far left corner of the
thermostat, allows the user to choose between off cool and
heat positions.
1. The first push on any button on the thermostat turns the
backlight on.
2. The second push of the MODE button will then allow the
user to cycle through the modes of desired operation:
OFF, COOL or HEAT.
3. If the thermostat is functioning properly, mount the ther-
mostat body on the previously installed wall plate.
Configuration
The PTAC control will automatically self-configure to work
with the wall thermostat (DSA02NO Kit) if installed and
bound.
3
Advertisement
