Table of Contents
Advertisement
Quick Links
USER'S MANUAL
for
CONTINUOUS FLOW, FULL FACE
SUPPLIED AIR RESPIRATORS
P/N 9901
P/N 9901HD
P/N 9902CV
P/N 9902C
P/N 9902HC
P/N 9902EF
Read and understand all instructions before using this product. Open carton carefully and inspect product for damage
caused by carrier. If any damage is found, report and submit claim to carrier.
1
Advertisement
Table of Contents
Related Manuals for Allegro 9901
Summary of Contents for Allegro 9901
- Page 1 USER’S MANUAL CONTINUOUS FLOW, FULL FACE SUPPLIED AIR RESPIRATORS P/N 9901 P/N 9901HD P/N 9902CV P/N 9902C P/N 9902HC P/N 9902EF Read and understand all instructions before using this product. Open carton carefully and inspect product for damage caused by carrier. If any damage is found, report and submit claim to carrier.
-
Page 2: Table Of Contents
TABLE OF CONTENTS PAGE INTRODUCTION/DESCRIPTION/SAFETY PRECAUTIONS ........3 WARNINGS AND LIMITATIONS ................3-4 CAUTIONS AND LIMITATIONS ..................5 SPECIAL USER’S INSTRUCTIONS ................5 PARTS LIST ........................6 AIR QUALITY AND VOLUME ..................6 INLET PRESSURE ..................... 6-7 DONNING/DOFFING INSTRUCTIONS ..............7-8 MAINTENANCE, INSPECTION AND CLEANING ............ -
Page 3: Introduction/Description/Safety Precautions
INTRODUCTION This manual provides instructions for the use and maintenance of the ALLEGRO INDUSTRIES Continuous-Flow, Full Face, Supplied Air Respirator. You must read and understand this manual and be trained in the proper use of the equipment before using it in a contaminated atmosphere. - Page 4 8. Do not use this respirator during abrasive blasting (including sandblasting). 9. Use only ALLEGRO INDUSTRIES component parts and combinations of parts to assemble or repair this respirator. Consult the parts list and approval label for approved parts. Use of non-approved parts voids the NIOSH approval and may result in bodily injury or death.
-
Page 5: Cautions And Limitations
S - Special or critical User’s Instructions and/or specific use limitations apply. Refer to User’s Instructions before donning. Warning! ALLEGRO INDUSTRIES air hose is approved for use with this Supplied Air Respirator. Using any other hose will automatically void the approval of the respirator and may be hazardous to the wearer. -
Page 6: Parts List
Air Temperature Controller 9910-11EF EF, LP Flow Adapter/Waist Belt Assembly Note: Refer to Allegro Parts Book for individual parts availability AIR QUALITY AND VOLUME The responsibility of maintaining the quality of the air supply is yours. The air breathed by the person... -
Page 7: Donning/Doffing Instructions
Down Tube Assembly.) 5. If using the 9901 low pressure mask assembly, secure the waist belt around your waist. Connect the approved supplied air hose to the male connector plug on the end of the breathing tube. -
Page 8: Maintenance, Inspection And Cleaning
CLEANING Respirators used by more than one worker should be cleaned and sanitized after each day of use. Allegro Industries recommends that the respirator be cleaned after each use. In some cases this can be accomplished by simply wiping the sealing area of the mask with a respirator wipe, such as the Allegro Industries P/N 1001 and P/N 3001 Respirator Cleaning Pads. -
Page 9: Storage, Repair And Specifications
Do not store respirator in direct sunlight, high temperatures, high humidity or in any contaminated area. It is vital that respiratory equipment be stored in clean, dry areas so that it functions properly. REPAIR Replacements are limited by the user to those components listed on the NIOSH label and Allegro Industries Parts Catalog. SPECIFICATIONS... -
Page 10: Warranty And Return Policy
This Limited Warranty is conditioned upon proper use of the Product by Purchaser and applies only to Products manufactured by or for Allegro that can be identified by the Allegro trademark, trade name or logo affixed to them. This Limited Warranty does not apply to or cover: (a) defects or damage caused by or resulting from external causes including, but not limited to, accident, carrier handling, improper packaging in shipment;... - Page 11 All Purchasers must obtain a Return Merchandise Authorization Number (“RMA#”) before returning any Product to Allegro. Allegro will refuse to accept any Product returned that does not have the RMA# clearly marked on the outside of the package or box. The Purchaser may obtain this RMA# by telephoning Allegro’s Customer Service number at (800) 622-3530, or by requesting it in writing by mailing...
- Page 12 Each Purchaser’s sole and exclusive remedy for defects in Products covered by this Limited Warranty is limited to Allegro’s correction of the defect by repair or replacement. 4. Authorized returns of saleable merchandise, other than shipments made in error by Allegro, will be subject to a 20% restocking charge.
Need help?
Do you have a question about the 9901 and is the answer not in the manual?
Questions and answers