Hisense RQ5P470SMlE User's Operation Manual page 62

Display controls
Once the appliance is powered on, all icons on the display panel will be lit for
3 seconds with a buzzer sound.
All the icons will go off on the condition of all keys untouched and all doors
closed for one minute.
The control panel will light up when the door is open or you touch any button.
Setting the refrigerator running at high temperature will accelerate food
decomposition. For optimum food preservation, we recommend that when
starting the refrigerator for the first time, the temperature of fridge is set to
4°C(39°F), and that of freezer to -18°C(0°F), and that of My Fresh Choice to
-7°C(19°F).
Caution!
The temperature only means the average temperature of the whole
refrigerator cabinet. Temperatures inside each compartment may vary from
those displayed on the panel, depending on how much food stored and
where the refrigerator is placed. In addition, the actual temperature from
higher room and lower room will be different.
"Switching Celsius and
Fahrenheit"
1. Press " " or " " repeatedly until the
Celsius/Fahrenheit Indicator " " or " "
blinks.
2. Press the Confirm Control " " for the
first time, and " " or " " will be always
on. After that, each time you press the
Confirm Control "
will be switched between °C and °F, and
the temperature setting value of the
corresponding unit will be displayed in
the temperature area.
", the temperature
Note
"Fridge temperature control"
1. Press " " or " " repeatedly until the
Fridge icon " " blinks.
2. Press the Confirm Control " " for the
first time, and the Fridge icon "
always on. After that, press the Confirm
Control " " repeatedly to cycle
through the available temperature
settings, from 8°C to 2°C if you have
set temperature type to Celsius.
8°C- 7C- 6C- 5°C
2°C - 3°C -4°C
" will be
19