NETGEAR MS305 Installation Manual

Installation Guide
5-Port or 8-Port 2.5G Multi-Gigabit Ethernet
Unmanaged Switch
Model MS305
Model MS308
Package contents
• 5‑Port or 8‑Port 2.5G Multi‑Gigabit Ethernet Unmanaged Switch
• Power adapter (varies by region)
• Wall‑mount installation kit
• Rubber feet
• Installation Guide
1. Register the switch
1. From a computer or mobile device that is connected to the Internet, visit
my.netgear.com.
2. Log in to your NETGEAR account.
NOTE: If you don't have a free NETGEAR account, you can create one.
The Your Registered Products page displays.
Click the REGISTER NEW PRODUCT button.
3.
4. In the SERIAL NUMBER field, type the serial number of your switch.
The serial number is 13 digits long. It is printed on the switch label.
5. From the PURCHASE DATE menus, select the date that you purchased the switch.
6. Click the REGISTER button.
Your switch is registered to your NETGEAR account.
A confirmation email is sent to your NETGEAR account email address.
2. Connect the switch
Sample connections
MS308 switch
Internet
Computer
Laptop
Smart TV WAX610 AP
NOTE: In this example, the access point (AP) requires a power adapter because the
switch does not provide PoE power.
NOTE: All switch ports support 2.5 Gbps, 1 Gbps, and 100 Mbps. You can connect
any device to any switch port. We recommend that you use Category 5e (Cat 5e)
cables or higher‑rated cables for your connections.
This switch is designed for indoor use only. If you want to connect it to a device located
outdoors, the outdoor device must be properly grounded and surge protected, and
you must install an Ethernet surge protector inline between the switch and the outdoor
device. Failure to do so can damage the switch.
WARNING: Before connecting this switch to outdoor cables or devices, see
https://kb.netgear.com/000057103 for safety and warranty information.
3. Check the LEDs
When you connect the power adapter to the switch and plug the cable into an electrical
outlet, the LEDs indicate the status:
LED Description
Power LED Solid green: The switch is powered on and operating normally.
Blinking green: The switch is starting.
Off. Power is not supplied to the switch.
Both Port LEDs Solid green: 2.5 Gbps link on this port.
Blinking green: 2.5 Gbps activity on this port.
Off. No link is detected on this port.
Left Port LED only Solid green: 1 Gbps link on this port.
Blinking green: 1 Gbps activity on this port.
Router
Off. No link is detected on this port.
Right Port LED only Solid green: 100 Mbps link on this port.
Blinking green: 100 Mbps activity on this port.
Off. No link is detected on this port.
Technical specifications
Specification Description
Network interfaces RJ‑45 connectors that support 100BASE‑TX,
1000BASE‑T, and 2.5GBASE‑T
Ports MS305: 5
MS308: 8
Power adapter MS305: 12V @ 1A DC input
MS308: 12V @ 1.5A DC input
Maximum power MS305: 9.24W
consumption MS308: 7.98W
Hardware security Kensington slot
Dimensions (W x D x H) MS305: 6.2 x 4.0 x 1.14 in. (158 x 101 x 29 mm)
MS308: 6.2 x 4.0 x 1.06 in. (158 x 101 x 27 mm)
Weight MS305: 1.06 lb (480 g)
MS308: 0.97 lb (442 g)
Operating temperature 32 to 104° F (0 to 40° C)
Operating humidity 10 to 90% relative humidity, noncondensing
Storage temperature –4 to 158° F (–20 to 70° C)
Storage humidity 5 to 95% relative humidity, noncondensing
Maximum operating and 10,000 ft. (3,000 m)
storage altitude
Electromagnetic certifications EMC class B device, FCC, ISED, CE, RCM, VCCI, BSMI,
and compliance KC
Safety certifications CB, CE LVD, BSMI, RCM
March 2024 © NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.