Table of Contents
Advertisement
Turntable
The PHONO jacks of the amolifier can accept a turntable
with an MM type phono-cartridge
If the turntable
has a ground
wire, connect
it to the
unit's GND termina! to avoid hum.
Tuner
Use the TUNER jacks for connection to an FM stereo or
AM-FM
stereo tuner
Connect the left channel of the tuner to the [L; TUNER
input jack and the right channel of the tuner to the [R}
TUNER
input jack
cD
Use the CD jacks for connection to a CD player
Connect the left channel of the CD player to the [J CD
jack and the right channel of the CD player to the [R)
CD jack
VTR
AUX
Ground
Playback
Plug the left and right input cables of the tape deck into
the
(and [R] TAPE 1 REC jacks.
Second tape deck
Plug the input and output cables from the second tape
deck into the REC and PLAY jacks marked TAPE 2.
AC outlets (Except some countries)
The AC outlets on the rear panel of the power
sup-
ply unit may
be used to supply power
to other com-
ponents in the system, such as turntables, tape decks,
etc. Never connect equipment whose power consump-
tion exceeds the maximum
value shown at each outlet.
1. SWITCHED
outlets: These
outlets
supply
power
only when the unit is turned on.
The maximum
total
capacity (both outlets) is 100 watts.
2. UNSWITCHED
outlet: The
outlet
provides
power
when the unit
is plugged
into an active AC wail
outlet,
regardless
of the setting
of the
POWER
switch.
The maximum
capacity is 200 watts.
Advertisement
Table of Contents
