Paradyne Hotwire 6040 Installation Instructions

Mvl wall jack phone filter

Hide thumbs Also See for Hotwire 6040:

See also: Instruction and Installation Manual

Hotwirer 6040 MVL

Installation Instructions

Document Number 6040-A2-GN11-00

December 1999

Hotwire 6040 MVL Wall Jack Phone Filter

The Hotwirer 6040 MVLt Wall Jack Phone Filter separates voice and data signals to

improve data transmission throughput and minimize audible background noise.

It is recommended that a phone filter be placed on every phone, modem, fax machine,

or other telecommunication device that uses the same phone line as the Hotwire 6310

MVL Modem. There are two Hotwire MVL Phone Filters:

Hotwire 6035 MVL Phone Filter designed for use with a tabletop phone.

Hotwire 6040 MVL Wall Jack Phone Filter designed for use with a wall-mount

phone.

Product-Related Documents

Document Number

6035-A2-GN11

6310-A2-GN10

Contact your sales or service representative to order additional product documentation.

Paradyne documents are available on the World Wide Web at www.paradyne.com.

Select Library

Document Title

Hotwire 6035 MVL Phone Filter Installation Instructions

Hotwire 6310 MVL Modem Customer Premises

Installation Instructions

Technical Manuals

Wall Jack Phone Filter

Hotwire DSL & MVL Systems

Table of Contents

Need help?

Do you have a question about the Hotwire 6040 and is the answer not in the manual?

Page 1 December 1999 Hotwire 6040 MVL Wall Jack Phone Filter The Hotwirer 6040 MVLt Wall Jack Phone Filter separates voice and data signals to improve data transmission throughput and minimize audible background noise. It is recommended that a phone filter be placed on every phone, modem, fax machine, or other telecommunication device that uses the same phone line as the Hotwire 6310 MVL Modem.
Page 2 Installing the Hotwire 6040 MVL Wall Jack Phone Filter " Procedure 1. The local loop provides dial tone and terminates at the NID (Network Interface Device) at the customer premises. Disconnect the existing POTS wiring on the customer premises side of the NID.
Page 3: Important Safety Instructions
Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. This product is intended to be connected to Listed/Certified telephone wiring with a minimum of 24 AWG (.5 mm) behind a Listed/Certified primary protector. 3.
Page 4 Hotwire is a registered trademark of Paradyne Corporation. MVL is a trademark of Paradyne Corporation. All other products and services mentioned herein are the trademarks, service marks, registered trademarks or registered service marks of their respective owners. *6040-A2-GN11-00* Copyright E 1999 Paradyne Corporation *6040–A2–GN11–00*...