Table of Contents
Advertisement
18
OPERATION
1
Power (
)
Turns the air conditioner on and off.
A chime sounds to confirm you have turned
it on or off.
Mode
2
Press this button repeatedly to toggle
through and select the operating mode.
Modes include Cool, Dry (dehumidify)
and Fan. An LED illuminates to indicate the
selected mode. The default mode is Cool.
Cool (
)
Compressor runs and cools the room. Use
the ∧/∨ and Fan Speed buttons to set the
desired temperature and fan speed.
Dry (
)
Use the Dry mode to remove humidity from
the room without additional cooling. The fan
speed is preset and cannot be adjusted.
Fan (
)
Fan circulates air but compressor does not
run. Use the Fan Speed button to set the
desired fan speed to either High or Low.
Temperature Control ∧/∨
3
In Cool and Dry mode, the ∧/∨buttons
adjust the set temperature up to 86 °F
(30 °C) or down to 60 °F (16 °C), in
one-degree increments.
Fan Speed
4
Press repeatedly to toggle the fan speed
between High and Low settings. An LED
illuminates to indicate the selected fan
speed. The fan speed can be changed in
the Cool and Fan modes. The fan speed is
preset in the Dry mode. After pressing the
button, there is a brief delay before the fan
motor changes speed.
Timer
5
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF - When the air conditioner is
on, set it to automatically turn off from 1 to
24 hours later.
NOTE
• Each press of the Timer button advances
the timer by 1 hour. Once you have
finished setting the Delay OFF Timer, the
display returns to the temperature setting
after a short delay.
• To cancel the Timer function, press the
Timer button on control panel.
• Press and hold the Timer button on the
control panel for 3 seconds to set Auto
Swing.
Advertisement
Table of Contents
