Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support DUCT CLEANING BRUSH MODEL: DB22 / DB29/DB37 /DB22-DS / DB29-DS / DB22-DP / DB29-DP We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
PARAMETER LIST DB22 DB29 DB22 model DB22 DB29 DB37 Total 30ft 40ft 50ft 30ft 40ft 30ft 40ft length /12m /15m /12m /12m of pole weight 1.06 1.35 1.68 1.45 1.75 1.17 1.46 (kg) PART LIST B29- model picture 2-DP 9-DP...
SECURITY & WARNINGS In this section, you will find all the important information you need to be aware of before engaging in using your duct brush. Safety should be your top priority while using this product. Please read this information carefully, as improper use could damage the duct brush.
OPERATION STEP 1:Determine what material of venting you have. If white vinyl is currently installed, it is recommended to switch to a rigid or semi-rigid all metal venting. White vinyl and foil vinyl can be damaged if extra care is not taken when cleaning.
Page 7
STEP 4:Using the lint brush and a vacuum, clean the back of the dryer as well as the surrounding area. STEP 5:Disconnect the vent from the back of the dryer. Using the shop \AC/Blower adapter, attach it to the vent using duct tape. If the vent compresses when the vacuum is turned on, or the vacuum ramps up, this indicates there is a blockage.
Page 8
STEP 7:Cleaning from the inside of the house Feed the first rod through the Shop VAC adapter and connect the brush and drill. Make sure the adapter is taped to the end of the vent. Complete steps 7 and 8 as was done from the outside. With the vacuum or blower running, begin to spin the brush and extension rod into the vent.
Page 9
STEP 9: Once the system is cleaned, remove tape or clip from the outside damper, and return any louvers or screens that were taken off. Connect the vent back to the dryer with the correct material, and slide the dryer back in place.
Page 10
brushing from the inside. The vacuum will help pull and catch any debris that is broken loose. Dryer Lint Vacuum hose Attachment - It is an adaptor to connect easily and is suitable for most vacuum cleaners. The flexible vacuum hose can deeply clean the lint accumulated in the dryer for many years.
Page 11
Address:Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd.. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 SHUNSHUN GmbH Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom...
Page 12
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the DB22 and is the answer not in the manual?
Questions and answers