Table of Contents
Advertisement
Troubleshooting
•
The touch panel function may not work depending on the specification of an external computer and
connecting method.
• If the TOUCH POWER setting in USB in CONTROL is set to "ON", change it to "OFF" and back to
"ON" again after a moment.
• When using touch function at the display edge, there may be a slight gap between touch position on
.
the screen and where you touched. It is the specification and not a failure of product
6.
The USB hub only supports USB 2.0
To enable USB 3.0 on the USB hub you need to connect the 3 m USB cable supplied with the monitor
to one of the USB 3.0 ports of the OPS slot-in PC.
21
Advertisement
Table of Contents
