Table of Contents
Advertisement
-OCATION AND FUNCTION OF CONTROLS
3efore plugging in or attempting to operate this receiver,
'ach number in the photo is keyed to the descriptive text.
Amplifier section |
POWER switch
ya SPEAKERS switches
HEADPHONES jack
> POWER
switch
Depress to turn on the power. To turn the power off, press the
switch again.
BSPEAKERS switches
To drive speaker system A, depress the A switch.
To drive speaker system B, depress the B switch.
To drive both speaker systems A and B, depress both A and B swit-
ches.
® HEADPHONES
jack
Accepts any low or high impedance stereo headphones.
For headphone
monitoring
only, keep the SPEAKERS
switches
released.
9 VOLUME control
Regulates the overall sound level.
Sliding the lever to the right increases the volume and sliding it to
the
left
decreases
the
volume.
Be
sure
to lower
the
volume
whenever you turn the receiver on or off or make system connec-
tions.
® BALANCE control
;
» Governs the amount of sound coming from each paired speaker to
get optimum stereo effect. When you turn the BALANCE control to
the right, the left channel volume is decreased, and vice versa.
® VOLUME control
ip BALANCE control
iP BASS and TREBLE tone controls
LOUDNESS switch
TAPE MONITOR switch
@ BASS and TREBLE tone controls
These knobs control the prominence of bass and treble response.
Clockwise rotation increases response ; counterclockwise rotation
decreases it. Normally keep these at the "0" position.
@ LOUDNESS switch
@ TAPE MONITOR switch
Advertisement
Table of Contents
