Table of Contents
Advertisement
FM ANTENNA CONNECTION
75-ohm coaxial cable connection
@ Cut and remove the outer and inner covering as shown and twist
the shield braid and the conductor.
Approx.
15 mm (fe)
Conductor
Shield braid
Conductor
Shield braid
300-ohm twinlead connection
300 Q
Q,
Ribbon antenna supplied
tion it for the best reception.
aa
Fasten the ends
to a wall, etc.,
using thumbtacks
or adhesive tape.
MW AND LW ANTENNA CONNECTION
A} |
Position the ferrite-bar
antenna for best reception.
PROGRAM SOURCE CONNECTIONS
Record player
The PHONO
inputs accept a typical moving-magnet (MM) cartridge.
Tape recorder
The tape recorder jacks are provided to connect a tape deck: TAPE
for playing back a tape, and REC OUT for recording.
Other input sources
The
CD/AUX
inputs
are provided
for connecting
various
input
sources such as a tape recorder (for playback only), an additional
tuner, or a record player equipped with a ceramic cartridge.
(The CD/AUX and TAPE inputs are identical in sensitivity and input
impedance.)
GROUND CONNECTION
:
AC OUTLETS
Advertisement
Table of Contents
