Advertisement
Step 4
Step 5
RAK-STAR
Place the RAK-STAR circuit
board on the two screws on
either side of the metalwork,
ensuring that the stripped
CAT5 or CAT6 cables are sitting
on top.
Tighten the two screws to
secure the circuit board.
Using a punchdown tool,
terminate the CAT5 or CAT6
cables in the legs of the
RAK-STAR.
Once all cables have been
terminated, the data switches
should be switched to the on
position, and the power
jumpers should be set.
NB
The CAT5/CAT6 for the RAK-LINK
should be the first device to connect
to the RAK-STAR.
Manual Version 2.0.0
Advertisement
