Table of Contents
Advertisement
3. Disassembly and Reassemble
Description & Screws
3-1
Removing the 'ASSY REAR COVER'.
(Please follow 8 sequence on right.)
3-2
Disassemble all Hooks of Cover Rear along the
three side.
3-2
Picture Description
1.
Ready to insert open jig
adjust jig edge to hole.
3.
Rotate open jig to 90-degree.
5.
Insert hand and retain gap.
7.
Insert open jig till red line.
Jig Direction
2.
Insert open jig till red line.
4.
Lift jig to unlock wire hook
on bottom.
6.
Take out jig and insert in
side gap.
8.
Disassemble Hooks of
Cover Rear along the side.
Advertisement
Table of Contents
