Steering Wheel Control (Swc) - Boss Audio Systems BV9968MB User Manual

STEERING WHEEL CONTROL (SWC)

SWC INTRODUCTION
Steering Wheel Control (SWC) function allows you to operate this unit via an external
device (steering wheel control).
A third-party adapter must be used in order for this unit to be compatible with your
OEM steering wheel controls. We recommend PAC SWC series.
This unit has a built-in 3.5mm SWC interface that is compatible with many popular 3rd
party SWC control modules, such as PAC, METRA, and others.
10A
Wire harness
SWC Input
PROGRAMMABLE CONTROLS
The following radio / audio function controls are available to be programmed. T
Source
Mute
Home
Seek + / Next Track
Seek - / Previous Track
Volume +
SWC INSTALLATION / PROGRAMMING
Contact your local installation expert for the correct SWC adapter for your specific
vehicle.
1. For most SWC adapters, select program using "Pioneer/Sony/Other" mapping
order as described in "PROGRAMMABLE CONTROLS".
2. When programming, if a function is not supported (or not desired), then the function
MUST be skipped as per the SWC module instructions.
3. The SWC function MUST be programmed in the correct order as per the function
mapping order instructions.
Note
‡ Not all OEM steering wheel functions may be supported.
‡ For SWC programming technical assistance, call the number in your SWC instruction
manual.
* Your product design may differ.
3.5mm SWC port is located on the supplied wire harness
which is plugged into the rear panel of the unit.
Volume -
Band
Phone Menu
Bluetooth Talk
Bluetooth End Call
Voice Assistant / PTT
16