SNOWJOE SUNJOE 24V-HT16-LTE Operator's Manual

Cordless hedge trimmer

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

OPERATOR'S MANUAL

A Division of Snow Joe, LLC

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may result

in serious bodily injury or death.

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

DANGER!

This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

WARNING!

This indicates a hazardous situation, which, if

not followed, could result in serious injury or death.

CAUTION!

This indicates a hazardous situation, which, if

not followed, could result in minor or moderate injury.

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark areas

invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or

dust – Power tools create sparks which may ignite the dust

or fumes.

3. Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

Original instructions.

CORDLESS HEDGE TRIMMER

24V MAX* | 2.0 Ah |16- INCH

Model 24V-HT16-LTE

2. Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators – There

is an increased risk of electric shock if your body is earthed

or grounded.

3. Do not expose power tools to rain or wet conditions –

Water entering a power tool will increase the risk of electric

shock.

4. Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

5. When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the influence

of drugs, alcohol or medication – A moment of inattention

while operating power tools may result in serious personal

injury.

2. Use personal protective equipment. Always wear eye

protection – Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/or

battery pack, picking up or carrying the tool. – Carrying

power tools with your finger on the switch or energizing

power tools that have the switch on invites accidents.

4. Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

5. Do not overreach. Keep proper footing and balance at

all times – This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or jewelry.

Keep your hair, clothing and gloves away from moving

parts – Loose clothes, jewelry or long hair can be caught in

moving parts.

*DISCLAIMER: Initial no-load voltage, when fully charged,

peaks at 24V; nominal voltage under typical load is 21.6V.

Form No. SJ-24V-HT16-LTE-880E-M

SAVE THESE INSTRUCTIONS

Table of Contents

Summary of Contents for SNOWJOE SUNJOE 24V-HT16-LTE

Page 1 CORDLESS HEDGE TRIMMER 24V MAX* | 2.0 Ah |16- INCH OPERATOR’S MANUAL Model 24V-HT16-LTE A Division of Snow Joe, LLC Form No. SJ-24V-HT16-LTE-880E-M IMPORTANT! 2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators – There Safety Instructions is an increased risk of electric shock if your body is earthed or grounded.
Page 2: Hedge Trimmer Safety Warnings
7. If devices are provided for the connection of dust 3. When BATTERY pack is not in use, keep it away from extraction and collection facilities, ensure these are other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connected and properly used.
Page 3: Operation
5. Hold the hedge trimmer by insulated gripping surfaces 4. Before using the product and after any impact, check for only, because the blade may contact hidden wiring. signs of wear or damage and repair as necessary. Blades contacting a "live" wire may make exposed metal 5.
Page 4: Residual Risks
4. Keep tight grip on the handles/grip surface. IMPORTANT! Analyses confirm that incorrect use and poor care of high-performance batteries are the main factors responsible 5. Maintain this product in accordance with these instructions for personal and/or product damage. and keep it well lubricated (where appropriate). 6.
Page 5 ® customer 9. When handling batteries, be wary of electrostatic charge. service center at 1-866-SNOWJOE (1-866-766-9563). Electrostatic discharges can damage the electronic protection system and the battery cells. Avoid electrostatic 3. Electrical plugs must match the outlet. Never modify the plug charging and never touch the battery poles.
Page 6: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Descriptions Symbols Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, SAFETY ALERT –...
Page 7: Know Your Cordless Hedge Trimmer
Know Your Cordless Hedge Trimmer Read the owner’s manual and safety instructions carefully before operating the cordless hedge trimmer. Compare the illustration below to the cordless hedge trimmer in order to become familiar with the location of the various controls and adjustments. Save this manual for future reference.
Page 8: Battery Pack Operation
® customer service Immediately after using the battery pack, the charge level button center at 1-866-SNOWJOE (1-866-766-9563). may display a lower charge than it will if checked a few minutes NOTE: Do not discard the shipping carton and packaging later. The battery cells “recover” some of their charge material until you are ready to use the cordless hedge after resting.
Page 9 2. Check that the mains voltage is the same as that marked WARNING! Do not use any attachments or accessories on the rating plate of the battery charger. Then, plug the not recommended by the manufacturer of this product. charger adapter into an appropriate AC power outlet. The use of attachments or accessories not recommended can Connect the charger plug into the charge socket of the result in serious personal injury.
Page 10: Cutting Procedures
3. To turn the tool OFF, release the On/Off trigger (Fig. 4). NOTE: Do not press the On/Off trigger until you are ready Fig. 6 to make a cut. Cutting Procedures WARNING! Never cut near electric cords or power lines. If the blade jams on any electrical cable, DO NOT TOUCH THE BLADE.
Page 11: Recycling + Disposal
® + Sun Joe ® customer unsatisfactory cutting results. service center at 1-866-SNOWJOE (1-866-766-9563) for all replacement parts and accessories for your product. Cleaning the Hedge Trimmer Lubricate the Blades 1. Stop the motor and remove the battery. For easier operation and longer blade life, lubricate the hedge 2.
Page 12: Service & Support
Snow Joe + Sun Joe ® ® • Increase the separation between the equipment and customer service center at 1-866-SNOWJOE receiver. (1-866-766-9563). • Connect the equipment to an outlet on a circuit different than the one the receiver is connected to.
Page 13: Optional Accessories
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer service ® ® center at 1-866-SNOWJOE (1-866-766-9563).
Page 14 PRODUCT REGISTRATION: Snow Joe strongly encourages you to register your Product. You can register online at snowjoe.com/register, or by printing and mailing in a registration card available online from our website, or by calling our Customer Service Department at 1-866-SNOWJOE (1-866-766-9563), or by e-mailing us at help@snowjoe.com.
Page 16 sunjoe.com...

SNOWJOE SUNJOE 24V-HT16-LTE Operator's Manual

Quick Links

Related Manuals for SNOWJOE SUNJOE 24V-HT16-LTE

Summary of Contents for SNOWJOE SUNJOE 24V-HT16-LTE

Table of Contents