Operating Your Wine Cabinet; Setting The Temperature - Prima PRWC401 Instruction Manual

OPERATING YOUR WINE CABINET

Please use the cabinet within ambient temperatures between 16-32ºC,
if the ambient temperature is higher or lower than this, it will cause
the temperature to fluctuate in the cabinet, possibly preventing it
from reaching 4-20ºC.

SETTING THE TEMPERATURE

To change the temperature
Press the "+" or "-" buttons until the required temperature is shown
-
on the display.
The preset temperature is 12°C.
-
To change the temperature display from Fahrenheit to Celsius, or
-
Celsius to Fahrenheit, Press and hold the "+" and "-" buttons for
three seconds.
Press and hold the "power" and "light" buttons for three seconds,
-
the control panel can be switched to "locked" or "unlocked"
mode. In the "locked" mode, none of button would react when
being pressed.
To view the set temperature, touch the "+" or "-" button at any time
-
and the set temperature will flash in the LED display for five
seconds.
The display shows the set temperature when the wine cooler is on.
-
Optimal temperature selection
Whilst wine is best stored at temperatures between 13 and 15˚ C, your wine can
also be stored at drinking temperature. For red wine this is between 15 and 17˚C,
and for white wine between 12 and 13˚C.
NOTE
If the unit is unplugged, power lost or turned off, you must wait 3 to 5
minutes before restarting the unit. If you attempt to restart before this
time delay, the wine cooler will not start.
9