Installation; Before Using Your Wine Cooler - Prima PRWC401 Instruction Manual

INSTALLATION

Before using your wine cooler

Remove the exterior and interior packing.
-
IMPORTANT: Before connecting the wine cooler to the power
-
source, let it stand upright for at least 12 hours. This will reduce the
possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water using a
-
soft cloth. Before installation, turn the unit off and
unplug it from the outlet.
NOTE
To protect the appliance in transit and delivery the door is packed
tightly against the cabinet. When first installed this can mean the door
seal appears thinner on one side of the door due to compression, this is
normal and once out of the box it will relax over a short period of time
and the door will return to the normal position. If you wish to speed up
the process you can gently warm the seal with a hair dryer on a low
temperature setting. This can help relax the seal helping it return to
normal thickness a little faster.
7