Related Manuals for TURBRO AirSupply MS12
Summary of Contents for TURBRO AirSupply MS12
- Page 1 RECHARGEABLE MISTING FAN Model: MS12 IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USE. RETAIN THIS MANUAL FOR FUTURE REFERENCE.
-
Page 2: Table Of Contents
CONTENTS SAFETY INSTRUCTIONS ·························································02 PACKAGE CONTENTS ·····························································04 SPECIFICATIONS ·····································································04 PRODUCT FEATURES ······························································05 ASSEMBLY ················································································06 HOW TO USE ·············································································12 MAINTENANCE AND CARE ······················································15 WARRANTY INFORMATION ·····················································18... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Please read all instructions before attempting to assemble, operate or install the product. ● Please keep the fan out of reach of children, and the fan is not intended for children. ● Keep children and bystanders away while operating an appliance.Distractions can cause you to lose control. - Page 4 ● Please cut off power prior to cleaning, it is forbidden to detach/open rotor protective cover to clean the rotor blade. ● Ensure that the battery compartment cover is completely closed to prevent water from contacting battery or entering battery port.
-
Page 5: Package Contents
PACKAGE CONTENTS Upper Bracket Fan Unit Water Tank Unit Power Supply Charger Battery Pack Water Tank Lid SPECIFICATIONS Model MS12 Power Supply 100-240V, 50/60Hz Input Rating 24V DC, 1.2A Lithium-ion Battery 3200mAh x 6 cells Airflow 1500CFM Water Tank 11L / 2.9Gal... -
Page 6: Product Features
PRODUCT FEATURES Top Handle Pump Misting Nozzles Water Hose Pump Power Line Swivel Caster Wheels Adjustment Knob Battery Compartment Water Tank Lid Water Tank... -
Page 7: Assembly
Switching Knob & Fan Speed Knob Battery Capacity Power Supply Indicator Jack Pump Switch USB Output Dimensions 29.6 in 10.4in 19in... - Page 8 INSTALLATION WARNING: If any parts are damaged or missing, do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. Step 1. Connect the Fan Unit and the Water Tank Unit, install the Main Support from the Fan Unit into the Subframe.Please pay attention to that...
- Page 9 Step 3. Place the Water Tank Lid and make both lifting handles fasten with the Water Tank. Step 4. Install Water Pump Power Line to the round socket at the bottom of the Battery Compartment. Step 5. Connect and fasten the Water Hose to the Pump.
- Page 10 Disassemble 1. Before disassembling the product, please take out the Battery Pack and make sure that the fan is OFF. 2. Unscrew the Water Hose from the Pump and pull out the power line of the water pump.
- Page 11 3. To detach the battery pack a. Uncover the USB waterproof silicone cover at the bottom. b. Hold two sides (bevel edge) of the battery bottom with hands and pull out the battery outwards.
- Page 12 4. Dislocate the rear cover slightly upward (Align the reference lines of the battery compartment and rear cover, as shown in Figure 1 below) and then push-down and fasten（as shown in Figure 2 below） Figure 1 Figure 2 5.
-
Page 13: How To Use
HOW TO USE CHARGE THE BATTERY PACK BEFORE FIRST USE You can use the Fan function and Misting function separately or together. Fan Function Rotate the Switch Knob on the control panel to turn on the fan. This fan adopts stepless speed regulation, after starting the fan, rotate indication point of the rotary switch from the symbol “-”... - Page 14 Charging the battery Charging via Power Supply Jack Please pull out the waterproof cover at the power supply jack, connect the power cord with the power supply jack at first, and then plug the charger to a suitable electrical outlet, the Battery Capacity Indicator light corresponding with the residual current will be in the state of flickering when charging.
- Page 15 Charge the battery pack separately After the product is discharged and it is necessary to take down the battery pack to charge separately, please take down the battery pack by step, there is power display enable button at the side of detachable battery; in case of...
-
Page 16: Maintenance And Care
MAINTENANCE AND CARE Warning: To avoid serious personal injury, always remove the battery pack from the product when cleaning or performing any maintenance. Fan Body Maintenance Clean the body of the fan with a damp cloth, wipe it clean, or clean it with a vacuum cleaner. - Page 17 1. Turn off the pump and the fan. 2. Remove the misting nozzles from the front grill by rotating them in a counterclockwise direction. 3. Disassemble each affected nozzle into parts. 4. To remove any foreign particles clogging or restricting the nozzles, flush the nozzle parts with water.
- Page 18 Filter Maintenance In order to avoid blocking the misting nozzle hole, water inlet end of the water pump is provided with filter head and inside with filter sponge, periodically examine the filter at the end of the water inlet to make sure that it is in good condition.
-
Page 19: Warranty Information
WARRANTY INFORMATION TURBRO provides a 1-year limit for TURBRO Misting Fan, from the date of purchase, subject to the following conditions and limitations. WHAT IS COVERED? ● Any alteration or misuse of the product will nullify this warranty.
Need help?
Do you have a question about the AirSupply MS12 and is the answer not in the manual?
Questions and answers
Battery will not charge