Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gorilla GROW CABINET 24X24X60
Summary of Contents for Gorilla GROW CABINET 24X24X60
- Page 1 GORILLA GROW CABINET 24”X 24” X 60”...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Overview Unpacking the Grow Cabinet Components Set Up - Elbows & Power Strip Set Up - Custom Carbon Filter Set Up - Kind LED Grow Light Set Up - Thermometer/Hygrometer/ICF Set Up - Grow System Final Assembly... -
Page 3: Overview
LET’S GET GROWING! Gorilla Grow Cabinet setup for success! With the Thank you for choosing the Gorilla Grow Cabinet! proper setup and care, this system will give you We’re excited to have you grow with us. Please read bountiful harvests for many years to come. -
Page 4: Unpacking The Grow Cabinet
UNPACKING THE GROW CABINET Carefully unbox the Gorilla Grow Cabinet and contents of your Gorilla Grow Cabinet. remove all contents from inside the cabinet. Make sure you have planned accordingly to ensure Unpack all the contents from the cabinet, as well as you have the proper amount of power and properly any components inside the hydroponic reservoir. -
Page 5: Components
COMPONENTS TEMPERATURE Gorilla Grow Thermometer / Cabinet Hygrometer CLOCK / HUMIDITY Kind LED pH Control Grow Light DOWN Custom Lotus Nutrients Carbon Filter Sample Pack SuperPonic 8 Net Trellis Hydroponic System 2 in Elbow Smart Plug 3 in Elbow GFCI Shock... -
Page 6: Set Up Elbows & Power Strip
SET UP ELBOWS & POWER STRIP Make sure the cabinet is in its final location since yet, this will be done once the system is it may be challenging to relocate once fully completely assembled. assembled. Do not plug in any of the components GROW STRONG TIP: Use masking tape and a marker to label the power cords of the components at the plug to help identify the components later in the assembly. -
Page 7: Set Up - Custom Carbon Filter
SET UP CUSTOM CARBON FILTERS Unpack the custom carbon filters and remove the four wing nuts on the back side of the fan, then remove the fan grill from the fan. Locate the large opening in the back of the cabinet with the four small surrounding holes. -
Page 8: Set Up Kind Led Grow Light
SET UP KIND LED GROW LIGHT Unpack the KIND LED Grow Light and locate the wire hangers. Connect the wire hangers to each of the metal hangers on the light. We have set the light on a convenient Yo-Yo system so the height can be adjusted as your OUTPUT OUTPUT Full Spectrum... -
Page 9: Set Up Thermometer/Hygrometer/Icf
SET UP THERMOMETER/HYGROMETER/ICF Locate the internal circulation fan. Note the “S” hook connected to the base of the fan. This hook will fit into the notches located on the backside of the inner door frame. Mount the Fan on one of the lower notches. -
Page 10: Set Up Grow System
SET UP GROW SYSTEM To set up your hydroponic system, please refer to the SuperPonic 8 instruction manual. OUTPUT OUTPUT Full Spectrum Full Spectrum Red + IR + UV Red + IR + UV Cluster Cluster Dimming Dimming 100% 100% Cluster Dimming Control... -
Page 11: Final Assembly
Do not plug in the power strip yet. Plug the GFCI Protector into any 110v wall socket. time to turn on the Gorilla Grow Cabinet. Turn With the power strip turned OFF, plug the power the power strip switch to the ON position, and strip into the GFCI Protector. - Page 12 NEED ASSISTANCE? CHECK OUT OUR SUPPORT PORTAL WEB: gorillagrowtent.com SUPPORT: support.growstrongindustries.com PHONE: 1-855-448-4769...
Need help?
Do you have a question about the GROW CABINET 24X24X60 and is the answer not in the manual?
Questions and answers