Advertisement
Quick Links
Advertisement
Related Manuals for Gorilla GROW CABINET 18X24X30
Summary of Contents for Gorilla GROW CABINET 18X24X30
- Page 1 GORILLA GROW CABINET 18”X 24” X 30”...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Overview Unpacking the Grow Cabinet Components Set Up - Elbows & Carbon Filter Set Up - ICF/Thermometer/Hygrometer Set Up - Kind LED Grow Lights Set Up - Grow System Final Assembly... -
Page 3: Overview
LET’S GET GROWING! Gorilla Grow Cabinet setup for success! With the Thank you for choosing the Gorilla Grow Cabinet! proper setup and care, this system will give you We’re excited to have you grow with us. Please read bountiful harvests for many years to come. -
Page 4: Unpacking The Grow Cabinet
UNPACKING THE GROW CABINET Carefully unbox the Gorilla Grow Cabinet and contents of your Gorilla Grow Cabinet. remove all contents from inside the cabinet. Make sure you have planned accordingly to ensure Unpack all the contents from the cabinet, as well as you have the proper amount of power and properly any components inside the hydroponic reservoir. -
Page 5: Components
COMPONENTS pH Control Gorilla Grow Cabinet DOWN Lotus Nutrients X40 Kind LED Sample Pack Bar Lights Net Trellis Carbon Filter SuperPonic 8 Smart Plug Hydroponic System 2 in Elbow GFCI Shock w/ Etension Buster Internal Industrial Circulation Fan Power Strip... -
Page 6: Set Up Elbows & Carbon Filter
SET UP ELBOWS & CARBON FILTER Make sure the cabinet is in its final location since yet, this will be done once the system is it may be challenging to relocate once fully completely assembled. assembled. Do not plug in any of the components GROW STRONG TIP: Use masking tape and a marker to label the power cords of the components at the plug to help identify the components later in the assembly. -
Page 7: Set Up Icf/Thermometer/Hygrometer
SET UP ICF/THERMOMETER/HYGROMETER Locate the internal circulation fan. Note the “S” hook connected to the base of the fan. This hook will fit into one of the two provided notches located on the backside of the inner door frame. Mount the fan on the lower notch. As your plants grow taller, move the fan to the upper notch. -
Page 8: Set Up - Kind Led Grow Lights
SET UP KIND LED GROW LIGHT NOTE: The two (2) pre installed Kind LED X40 lights have a protective plastic film on the lenses. This MUST be removed prior to operation. Locate the two (2) LED drivers, daisy chain, and hole in the driver with the screw. -
Page 9: Set Up Grow System
SET UP GROW SYSTEM To set up your hydroponic system, please refer to the SuperPonic 8 instruction manual. -
Page 10: Final Assembly
Do not plug in the power strip yet. Plug the GFCI Protector into any 110v wall socket. time to turn on the Gorilla Grow Cabinet. Turn With the power strip turned OFF, plug the power the power strip switch to the ON position, and strip into the GFCI Protector. - Page 11 NEED ASSISTANCE? CHECK OUT OUR SUPPORT PORTAL WEB: gorillagrowtent.com SUPPORT: support.growstrongindustries.com PHONE: 1-855-448-4769...
Need help?
Do you have a question about the GROW CABINET 18X24X30 and is the answer not in the manual?
Questions and answers