Page 1
L E N S M A N 2 E X P O S U R E U S E R M A N U A L...
Page 2
Congratulations on your new HORAGE Lensman 2 Exposure, we hope it brings you much joy in the years to come. Please be sure to review the “Important Information” and “Operation Instructions” listed below prior to using your Lensman 2 Exposure.
Page 3
M o v e m e n t - K 2 IMPORTANT INFORMATION Attention: In order to guarantee the reliability of your HORAGE watch, we have created a short list of recommendations for you. • Your Lensman 2 has a K2 automatic micro-rotor movement. This means it will automatically re- wind the mainspring whist being worn.
M o v e m e n t - K 2 USEFUL INFORMATION • The accuracy of the Lensman 2 Exposure is calculated within a 3-day operating timeframe and therefore to ensure your watch remains precise please be sure to wear or manually wind the watch on, or before the 3rd day prior to it last being worn or wound.
Page 5
LENSMAN 2 M o v e m e n t - K 2 USEFUL INFORMATION • Excessive, continued turning of the crown can reduce the longevity of seals used for water re- sistance. If you frequently take your watch in the water, it is recommended to have its water resistance checked by your local watch service centre every three years.
Page 6
L E N S M A N 2 E X P O S U R E E X P O S U R E C A L C U L A T O R W A T C H & 2 4 H O U R G M T...
Page 7
LENSMAN 2 M o v e m e n t - K 2 Overview Local Hour Hand Minute Hand Seconds Hand 24 GMT Hand 12-Hour Indicators 24-Hour Indicators Lighting Condition Indicators Shutter Speed Indicators Bi-Directional Rotating Friction Bezel ISO Setting Indicators F-Stop/Aperture Indicators Push/Pull Crown...
Page 9
LENSMAN 2 M o v e m e n t - K 2 Positions: • 0 Crown Closed and Winding position • 1 24 Hour GMT Time Set • 2 Hour, Minutes, Seconds and 24 Hour Set...
Page 10
LENSMAN 2 M o v e m e n t - K 2 Position 0: Crown Closed and Winding position • The crown is completely pushed in against the side of the case • Turn crown clockwise to wind watch •...
Page 11
LENSMAN 2 M o v e m e n t - K 2 Hour Hand Minute Hand Position 2: Setting 12-Hour Time (or reference time) • Pull the crown outwards to the second notch. The seconds hand will stop for more accurate time setting. •...
Page 12
LENSMAN 2 M o v e m e n t - K 2 Hour Hand Minute Hand Position 1: 24-Hour GMT Hand Set • Set the 24-Hour Hand by turning the crown clockwise. • Turn clockwise the GMT hand moves in one-hour increments. Turning counterclockwise nothing happens.
Page 13
LENSMAN 2 M o v e m e n t - K 2 Calculating Exposure For a Photograph The calculation is based on an average calculation. 1. Lighting Conditions: Decide what lighting conditions you are in based on the bezel icons 7. •...
Page 14
LENSMAN 2 M o v e m e n t - K 2 2. ISO Setting: Reference camera settings for what ISO you are set on (film/digital sensor sensitivity). • Rotate ISO number to align with lighting condition. • For example if you are using ISO 100 and you are outdoors in sunny conditions, rotate the bezel so that the 100 marker sits directly above the sunshine icon.
Need help?
Do you have a question about the LENSMAN 2 EXPOSURE and is the answer not in the manual?
Questions and answers