Page 2
Dear Customer, Congratulation on your new HORAGE Lensman 1, we hope it brings you much joy in the years to come. Please be sure to review the “Important Information” and “Operation Instructions” Listed below prior to using your Lensman 1.
Page 3
• The Lensman 1 has a power reserve of over 5 days, or 120 hours. A fully wound watch will run longer than 5 days, however, the amplitude or consistency of the energy will reduce after 5...
M o v e m e n t - K - T O U USEFUL INFORMATION • The accuracy of the Lensman 1 is calculated within a 5-day operating timeframe and therefore to ensure your watch remains precise please be sure to wind the watch on or before the 5th day prior to it last being wound.
Page 5
LENSMAN 1 M o v e m e n t - K - T O U USEFUL INFORMATION • Excessive, continued turning of the crown can reduce the longevity of seals used for water re- sistance. If you frequently take your watch in the water, it is recommended to have its water resistance checked by your local watch service center every three years.
Page 9
LENSMAN 1 M o v e m e n t - K - T O U Wind the watch • The crown is located at 3 o’clock. • To wind, keep the crown fully pushed in and turn it in a clockwise direction.
LENSMAN 1 M o v e m e n t - K - T O U Setting the time 1. Pull the crown at 3 o’clock to its 1st and only position. 2. Turn the crown counterclockwise until the hands are posi- tioned just after the desired time.
Page 11
LENSMAN 1 M o v e m e n t - K - T O U Setting the time with stop second function 1. Pull the crown at 3 o’clock to its 1st and only position. 2. Turn the crown until the hands are positioned a few minutes past your desired time.
Page 12
M o v e m e n t - K - T O U Strap adjustment 1. The Lensman 1 ships with a black leather strap with black or red stitching that is held in place on your wrist with what we refer to as either a U-buckle or deployant buckle clasp.
Page 13
3. To remove the strap, simply press firmly down on the metal tab. 4. Repeat the process with the other strap. 5. To put a new Lensman 1 strap supplied by Horage on, simply reverse the process.
Need help?
Do you have a question about the LENSMAN 1 and is the answer not in the manual?
Questions and answers