Related Manuals for Yard force LB C20C
Summary of Contents for Yard force LB C20C
- Page 1 LB C20C GY228413 40V CORDLESS BLOWER/VACUUM Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
- Page 2 V 1.0...
-
Page 3: Table Of Contents
LB C20C Original Instructions CONTENT Intended use General safety warnings Product safety warnings Symbols Technical data Description of product Assemble Operation Maintenance and storage Troubleshooting CE declaration Disposal... -
Page 4: Intended Use
INTENDED USE This device is suited solely for the vacuuming and blowing of light and dry materials such as leaves, garden waste, grass, small branches, and small pieces of paper. The device is intended for private use on private land only. This product is not intended for commercial use. - Page 5 GENERAL SAFETY WARNINGS • Make sure to always wear the required personal protective equipment. • Exercise caution and only work when in good condition: - if you are tired or ill. - if you have ingested alcohol, medication or illegal drugs, do not use the device, as you are not in a condition to use it safely.
- Page 6 GENERAL SAFETY WARNINGS • Unsuitable material; • Insufficient maintenance. You can reduce the risks considerably by following the tips below: – Maintain the device in accordance with the instructions in the operating instructions. – Avoid working at low temperatures. – When it is cold, make sure your body and your hands in particular, are kept warm.
- Page 7 GENERAL SAFETY WARNINGS • Never use the device if the power cable is damaged. • If the device is not in use, make sure the plug is pulled out. • Make sure that the device is switched off before plugging in the mains cable. •...
- Page 8 GENERAL SAFETY WARNINGS Maintenance • Before conducting any maintenance on the device, make sure the battery has been removed. • Before conducting any maintenance on the device, disconnect the mains plug. • Only those maintenance and fault elimination tasks described here may be carried out. Any other tasks must be completed by a specialist.
-
Page 9: Product Safety Warnings
PRODUCT SAFETY WARNINGS • When working with the device, always maintain a safe distance and natural body position. • Always hold the device firmly in both hands. • Before starting to work, check the working area for animals and objects. Remove all objects that may be slung away or become jammed in the cutting tool. - Page 10 PRODUCT SAFETY WARNINGS • Be careful of the dust you have raised and flying objects. Especially dangerous is the rebound effect on walls. • Do not direct the device at people or animals when vacuuming or blowing. • Before starting to blow, loosen foreign bodies with a rake or broom.
-
Page 11: Symbols
SYMBOLS Safety symbols The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them require your careful attention and full understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures. - Page 12 SYMBOLS To reduce the risk of injury, user must read instruction manual carefully. Keep bystanders away. Objects thrown by the product could hit the user or other bystanders. Always ensure that other people and pets remain at a safe distance from the product when it is in operation.
- Page 13 SYMBOLS Conforms to relevant UK regulatory requirements. The product complies with the applicable European directives and an evaluation method of conformity for these directives was done Warning symbols on the battery pack To reduce the risk of injury, user must read the instruction manual carefully.
- Page 14 SYMBOLS The product complies with the applicable European directives and an evaluation method of conformity for these directives was done. Warning symbols on the charger To reduce the risk of injury, user must read the instruction manual carefully. The charger is for indoor use only. Double insulation WEEE symbol.
-
Page 15: Technical Data
TECHNICAL DATA Model LB C20C Mains voltage 40 V max. blow speed 205 km/h max. air flow 510m Turbo max. blow speed 234km/h Turbo max. air flow 630m Bag content 45 l Mulch ratio 15:1 Weight 5.0 kg Measured Sound power level: LwA 99 dB(A) K=2.24 dB(A) -
Page 16: Description Of Product
DESCRIPTION OF PRODUCT Parts description TURBO button ON/OFF and Speed knob Housing body Battery pack Collection bag Blower tube Wheels Rake Lower tube 10. Upper tube 11. Viewing window 12. Shoulder strap 13. Adjustment lever (blowing, vacuuming) Delivery contents Carefully unpack the appliance and check that it is complete. Dispose of the packaging material correctly. -
Page 17: Assemble
ASSEMBLY Install the suction tube and shoulder strap Insert the lower vaccum tube to the upper tube then fit the screws to lock the tubes together. Insert the tube assembly to the main housing body and then fit the screws to lock into place. - Page 18 Insert the battery pack with moderate force until it locks in to place. WARNING: Only use Yard Force 20V original battery pack! To remove the battery pack from the tool Press the battery pack release button.
- Page 19 OPERATION Selecting the operating mode Set adjustment lever to vacuum or blower. When using as a leaf vacuum: insert the collection bag as shown into the device and ensure that it clicks into place. When using as a leaf blower: remove the collection bag and assemble the cap.
- Page 20 OPERATION Cleaning impeller blockage-Vision Windows Turn OFF the device and remove the batteries. Counter clockwise the knob to open the viewing window. WARNING: Before use it must be removed the batteries. WARNING: The lmpeller blades can casue damage. Rake Adjustment •...
-
Page 21: Maintenance And Storage
MAINTENANCE AND STORAGE DANGER! Risk of injury! Switch off the product and disconnect the batteries before all cleaning and maintenance work. Wait untill all moving parts are completely stopped. Cleaning the device • Brush off coarse dirt. • Wipe down the device with a slightly damp cloth. •... - Page 22 Unit A&B Escrick Business Park Escrick, York YO19 6FD/ United Kingdom Declare that the product: Description: 40V Cordless Blower/Vacuum Model No. LB C20C / GY228413 Function: vacuuming and blowing leaves Complies with the essential health and safety requirements of the...
-
Page 23: Ce Declaration
MEROTEC GmbH, Otto-Brenner-Straße 8, 47877 Willich/ Deutschland Declare that the product: Description: 40V Cordless Blower/Vacuum Model No. LB C20C / GY228413 Function: vacuuming and blowing leaves Complies with the essential health and safety requirements of the following directives: Machinery Directive 2006/42/EC... -
Page 24: Disposal
DISPOSAL Disposing of packaging Dispose of packaging according to type. Sort the paperboard and cardboard as waste paper and the film as recyclable material. Disposing of the washer Applicable in the European Union and other European countries with systems for separate collections of recyclable waste. This symbol indicates that this product may not be disposed of together with domestic waste in compliance with the (2012/19/EU) Regulation pertaining to waste electrical and...