Panasonic WJ-AVE7 Operating Instructions Manual page 25

C. Superimpose Effect
The Superimpose Effect adds an effect to the present picture.
SUPERIMPOSE EFFECT EEE
KEY
LEVEL
ext
A B) CAMERA
REVERSE
1 -€0T,
EDGE BACK COL. «WHITE
REVERSE
A-bus with Back Colour
or White Colour
SUPERIMPOSE EFFECT
EDGE
B-bus with Back Colour
or White Colour
External camera with
Back Colour or White Colour
-25-
m@ A-bus Superimpose
Reset the operation panel to initial mode.
1 Press the A button.
2 Press the ON button.
The Superimpose Effect is activated.
3 Adjust the KEY LEVEL.
A back colour is added to the dark part of the A-bus
picture.
Note: Select the desired back colour in the BACK
COL. section.
4 Press the WHITE button.
The back colour changes to white.
@ B-bus Superimpose
5 Press the B button.
A back colour or white is added to the dark part of the
B-bus picture. All other operations and effects are the
same as in A-bus Superimpose.
@ External Camera Superimpose
6 Press the EXT. CAMERA button.
A back colour or white is added to the dark part of the
External Camera picture. All other operations and
effects are the same as in A-bus Superimpose.