Page 2
CAME-WAERO Wireless Intercom System The CAME-TV WAERO Duplex Digital Wireless Foldable Headset is easy to set up and provides about 366m/1200ft of open range between the Master and Remote headsets. There are two versions available, US for the US while EU for EU countries and other countries can use either version if it does not have the regulation on frequency use.
Page 3
CAME-WAERO Wireless Intercom System Mute On Quick Start Guide I n s t a l l t h e b a t t e r i e s correctly into the battery compartments of the master and remote, and the device will automatically power on and be ready for use.
Page 4
CAME-WAERO Wireless Intercom System Operating Instructions 1.Power On/Off Power on: the headset will be powered on automatically when battery is installed. In the condition that battery is already in its compartment, one quick press the power button to turn on the headset.
Page 5
CAME-WAERO Wireless Intercom System How to Optimize the Communication Effect 1. In order to get the best communication result, it is recommended to place the master (or HUB) in the center position, and the remotes are arranged around the master (or HUB) to ensure that each remote is within the working distance.
Page 6
4 Person Team Max Distance 2400ft 1200ft(366m) 1200ft(366m)
Page 7
4 Person Team Pairing Diagram Master Remote B C J...
Page 8
7 Person Team Max Distance 2400ft Master A 1200ft(366m) 1200ft(366m)
Page 9
7 Person Team Pairing Diagram Remote Master Remote Master D E F Remote G H I Master...
Page 10
9 Person Team Max Distance 3600ft 1200ft(366m) 1200ft(366m) Master A 1200ft(366m) 1200ft(366m)
Page 11
9 Person Team Pairing Diagram Remote Master R B C Remote Master D E F Remote Master G H I...
Page 12
CAME-WAERO 6 Person Team 6 Person Talking in One Group or Split into Two Groups (Each Group Four Person) Master A Master A 3.5mm Audio Cable ( Make sure connect with two different groups )
Page 13
CAME-WAERO 18 Person Team Expanding to 18 Person Talking or Split into 2/3/4 Different Groups Master A Master A 3.5mm Audio Cable ( Make sure connect with two different groups )
Page 14
CAME-WAERO WAERO with HUB Set The Hub incorporates two Masters and one built-in Remote. Each Master within the Hub can accommodate up to 3 Remotes. With this configuration, a single hub enables connections for up to 9 headsets within a single system, while two hubs can facilitate connections for up to 14 headsets.
CAME-WAERO Product Details Remote Working indicator for M1 group Working indicator for HUB remote Working indicator for M2 group Master 1 button Remote button Master 2 button Power indicator Charging indicator Charging indicator Battery compartment...
CAME-WAERO Battery Compartment As long as an NB-6L battery is present in the battery compartment, it will constantly supply power to the hub. If there is no battery, the hub can also be connected to an external power supply through the USB port.
WAERO Pairing Steps 1 Ensure that both the Master and all Remote devices are powered on. When the Master enters the pairing state, any Remotes not powered on will be cleared from the set.
Page 18
CAME-WAERO Waero with HUB Pairing Instructions These are precise pairing procedures. It is strongly recommended to follow the guide carefully and accurately for successful operation of this unit. Pairing The product comes pre-paired, allowing immediate use upon switching on the device without any additional steps.
Page 19
CAME-WAERO Waero with HUB Pairing Instructions **Pairing Steps for Different Group Remotes:** 1 Pairing Master A with Remote Hub R and Remote headsets B/C: (In below two circumstances, make sure Master A, Remote Hub R, and Remote headsets B/C are powered on.) If it is Remote B/C/J disconnected from Master A: - Activate the pairing mode of Master A by pressing the "Volume Up"...
Page 20
CAME-WAERO Waero with HUB Pairing Instructions **Pairing Steps for Different Group Remotes:** 2 Pairing the Hub M1 group (Remote D/E/F): - Ensure that both the Hub M1 and all Remote D/E/F are powered on. - Press and hold the left button on Hub M1 until the blue LED indicator starts flashing quickly to enter the pairing state.
Page 21
**NOTES** CAME-WAERO 1 The Master module and remote module in the hub cannot be paired at the same time, as it may result in malfunction. 2 It is crucial to identify the group that the disconnected remote belongs to before pairing.
FCC Regulatory Compliance CAME-WAERO If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna.
Aftersales Services CAME-WAERO While we trust you will never have the need, if you do,our service is both friendly and hassle-free. Email: Americas: americas@came-tv. com Outside Americas: europe@came-tv.com Follow Us: https://www.facebook.com/CameTvGear/ https://www.instagram.com/cametv/ https://www.youtube.com/c/CameTVgear/videos https://www.twitter.com/CameTV...
Need help?
Do you have a question about the WAERO and is the answer not in the manual?
Questions and answers