Related Manuals for Oblica STUV 30 COMPACT
Summary of Contents for Oblica STUV 30 COMPACT
-
Page 1: Table Of Contents
STUV 30 COMPACT: MODEL SPECIFICATIONS 1. TECHNICAL DATA 2. PRE-INSTALLATION 3. INSTALLATION 4. OPERATION 5. TESTING Keep for future use... -
Page 2: Technical Data
W465 x H1040 x D447mm Firebox weight 114kg Flue kit Standard 6”/8”/10” DETERMINED UNDER TEST CONDITIONS: Nominal thermal output Efficiency (Australian Test) Emissions (Australian Test) 1.1 g/Kg 8” Flue PAGE 2 OBLICA | STUV 30 COMPACT INSTALLATION AND USER MANUAL... -
Page 3: Pre-Installation
2. PRE-INSTALLATION Congratulations on your purchase of the STUV 30 Compact. This appliance should be installed and checked by a qualified professional. Ensure you have read the operation guidelines thoroughly prior to first use. For any questions or concerns please contact Oblica on 03 9416 0400. - Page 4 250mm Combustible IMPORTANT: Frames must also be considered. Timber window frames must be treated as combustible surfaces (see 2.3). Aluminium frames can be treated as non-combustible surfaces (see 2.2). PAGE 4 OBLICA | STUV 30 COMPACT INSTALLATION AND USER MANUAL...
-
Page 5: Installation
8” Outer Case 10” Outer Case CEILING RING 8” Flue 8” Flue 6” Active Flue Fireplace outlet NOTE: The active flue must go around the fireplace outlet on the outside. PAGE 5 OBLICA | STUV 30 COMPACT INSTALLATION AND USER MANUAL... - Page 6 The top of the flue must be 900mm above the roofline. Alternatively, there must be a minimum distance of 3 meters from any higher section of roof. > 3 m – > 900 cm – > 900 cm > 900 cm – – PAGE 6 OBLICA | STUV 30 COMPACT INSTALLATION AND USER MANUAL...
- Page 7 Insulative board (9mm) Combustible + non combustible finish floor (eg. timber) Joist FLOOR PROTECTOR LAID ON JOIST Combustible Insulative board (9mm) floor (eg. timber) + non combustible finish Joist PAGE 7 OBLICA | STUV 30 COMPACT INSTALLATION AND USER MANUAL...
- Page 8 3. INSTALLATION (CONTINUED) FLOOR PROTECTOR LAID ON CONCRETE Combustible Non combustible finish floor (eg. timber) (eg.tiles) Concrete TOP VIEW 167.5 167.5 Floor protector Combustible floor (eg: Timber) 300mm 800mm PAGE 8 OBLICA | STUV 30 COMPACT INSTALLATION AND USER MANUAL...
-
Page 9: Operation
• The maximum load capacity for the STUV 30 Compact is 6kg of wood. • Burning only seasoned hardwood helps to protect the environment and lower emissions. For details of a wood supplier in your area please call our office on 03 9416 0400 or email info@oblica.com.au. WARNING: •... -
Page 10: Testing
1.1g/kg of dry wood, within the maximum specification of 2.5g/kg of dry wood and an efficiency of 80%. CONCLUSION: This appliance does comply with the requirements of AS/NZS 4012:4013 (2014) for the configuration tested. PAGE 10 OBLICA | STUV 30 COMPACT INSTALLATION AND USER MANUAL...