Removable tape
Remove the camera
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 53
"Remove the hinge cover" on page 55
"Remove the microphone rubbers" on page 59
Step 1.
Disconnect the EDP cable from the camera board and then remove the camera.
Figure 48. Remove the camera
Go to
https://support.lenovo.com/partslookup
Camera
Remove the LCD cover
"Remove the LCD module" on page 53
"Remove the hinge cover" on page 55
"Remove the LCD bezel" on page 55
"Remove the hinges" on page 56
60
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following