Zhone 4300 Installation Instructions Manual page 6

Pole Mounting Kits for the 4300 6U Outdoor Cabinet Installation Instructions
5. Drill three (3) 3/4" (19.05 mm) diameter holes completely through the pole at the locations marked in step 2.
6. Insert machine bolt (item 24) through mounting bracket and into the top mounting hole and press bolt and
bracket flush against the pole.
7. Place round-cupped washer (item 27), with the concave side in, on bolt and finger tighten nut.
8. Repeat step 6 for remaining bolts.
9. Secure the mounting bracket assembly to the pole by securely tightening the machine bolts to 40 ft-lbs for
wooden posts and 100 ft-lbs for metal posts.
10. Using proper lifting and safety equipment, place cabinet on mounting bracket assembly using supplied 3/8" and
½" hardware and tighten to 45 ft-lbs. Lifting eyelets are provided on the cabinet for hoisting it in place.
11. If the cable stubs connect to an underground cable, dress the cable down the pole. If the cable stubs connect to
an aerial cable, form a drip loop in the cable and dress it up the pole to the splice case.
For mounting heights less than 7' above grade, excess bolt length may need to cut off in order to
prevent a hazardous protrusion.
Lifting eyelets are provided to facilitate hoisting if desired.
6 November 2005 4300-A2-ZZ49-00