Zhone 4300 Installation Instructions Manual page 5

Table 2 - Pole Mounting with Pedestal
Item No. Qty Description
003 1 Bracket, Vertical Pole Mount, 13U with Pedestal
006 1 Bracket, Upper Pole Mount
009 6 Nut, Nylon Top Lock 3/8"
012 16 Washer, 3/8" Stainless Steel, SAE, Flat
015 6 Screw, 3/8-16 x 1", Stainless Steel, Cap
018 4 Washer, Split Lock, 3/8 ZP
021 4 Washer, 3/8", Flat, Rubber
024 3 Bolt, Square Head, 5/8-11 x 16 & Nut, Galvanized
027 3 Washer, Curved, 2 1/4 x 2 1/4 x 3/16, 5/8, Galvanized
030 3 Nut, 5/8, Galvanized (Included with Bolt)
033 3 Washer, Square, 2 1/4 x 2 1/4 x 3/16, 5/8, Galvanized
036 1 Bracket, Lower Pole Mount, Pedestal Support
039 4 Bolt, 3/8 x 1 1/4 Hex ZP
042 4 Flat Washer, 1/2" Type 316 Stainless Steel
045 2 Bolt, 1/2-13 X 1-1/2" Hex Head
048 2 Washer, Split, 1/2" Stainless Steel
051 2 Hex Nut, 1/2-13 Type 316 Stainless Steel
Have the following equipment ready before beginning this procedure:
One drill
One 3/4" x 12" drill bit
One 9/16" wrench
Two 15/16" wrenches
One 3/4" wrench
A pencil
Model PDN-4300-F1-610 Pole Mounting Kit
Follow this procedure for pole mounting:
1. Pre-assemble the upper and lower horizontal brackets (items 6 and 36) to the vertical bracket (item 3) as shown
in the above Figure.
2. Select a convenient mounting location on the pole.
3. Position the mounting bracket assembly against the pole and mark on the pole the location of the three (3) 5/8 "
bolts (item 24).
4. Place the mounting bracket assembly out of the way.
4300-A2-ZZ49-00
Pole Mounting Kits for the 4300 6U Outdoor Cabinet Installation Instructions
November 2005 5