Advertisement
• Before recording to a device connected to
the TV, make a test recording and check
the recording performance.
• Manufacturer shall not be liable for
compensation or incidental damages of any
kind whatsoever resulting from content that
was not properly recorded on the recording
device or that was modified or lost.
• Manufacturer shall not be liable for damages
of any kind whatsoever (breakdown of the
recording device, modification or loss of
the recorded content, etc.) resulting from
malfunction, operating failure or incorrect
operation due to combining with another
connected device.
• Do not turn off the power supply to the
USB storage device or disconnect the
connecting cable while the USB storage
device is operating. Doing so may result in
loss of the recorded data or malfunction of
the USB storage device.
• The recording function is not available in
all countries/regions.
• Please note that recording on the USB
storage device is no longer playable after
the TV's main-board is exchanged during
service.
• If the time information is incorrect, programed
recording may not be performed properly.
Furthermore, if the time information
differs according to the currently viewed
channel, programed recording may not be
performed properly depending on tuning
operations.
Important Safety Precautions
Exemptions
• Manufacturer is not liable for any damage
caused by fires, natural disaster (such as
thunder, earthquake, etc.), acts by third
parties, accidents, owner's misuse, or uses
in other improper conditions.
• Manufacturer is not liable for incidental
d a m a g e d ( s u c h a s p r o f i t l o s s o r
interruption in business, modification or
erasure of record data, etc.) caused by use
or inability to use of product.
• Manufacturer is not liable for any damage
caused by neglect of the instructions
described in the owner's manual.
• Manufacturer is not liable for any damage
caused by misuse or malfunction through
simultaneous use of this product and the
connected equipment.
When using a wireless network
CAUTION:
TM
• Bluetooth
and Wireless LAN devices
operate within the same radio frequency
range and may interfere with one another.
I f you use Bluetooth
LAN devices simultaneously, you may
occasionally experience a less than optimal
network performance or even lose your
network connection.
• If you should experience any such problem,
immediately turn off either your Bluetooth
or Wireless LAN device.
• Actual performance can vary, including
lower wireless network capacity, data
throughput rate, range and coverage.
• Performance depends on many factors,
conditions and variables, including
distance from the access point, volume
of network traffic, building materials and
construction, operating system used, mix
of wireless products used, interference and
other adverse conditions.
E
TM
and Wireless
TM
Advertisement
