Step 2: Control Unit Operation - Venen Engel 4 PREMIUM Operating Instructions Manual

Hide thumbs Also See for 4 PREMIUM:
Table of Contents

Advertisement

Remote Control Batteries
Before the initial use: Remove the battery protection and insert the battery (Type: CR2032; Diameter: 20mm, Height: 2.5mm, Voltage:
3V)!
Due to shipping policies, we are not allowed to provide a battery. We kindly ask for your understanding.
Warning: Keep the remote control and battery out of reach of children as there is a risk of suffocation.

STEP 2: CONTROL UNIT OPERATION

Follow the order as shown:
1
Turn the device on.
Select the pressure (30-240 mmHg). Start with a low setting.
2
During the massage application, you may change the
pressure.
Select duration of up to 30 minutes (a maximum of 5 minutes the first
3
time, and then increase incrementally)
4
Select a program.
Deactivateable air chambers: If you want to, for instance, exclude certain
5
areas of the leg from being massaged, you can do so here.
6
Launch the program.
5
1
6
2
3
4
EN
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

6

Table of Contents