Samsung HW-S60D User Manual page 10


Bluetooth PAIR
Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
• Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.
LED
Indicator
p (Play / Pause)

You can also play or pause music by pressing the button.
Up/Down/Left/Right

Press Up/Down/Left/Right on the button to select or set functions.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music
file.
• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a wireless
subwoofer or wireless rear speakers).

(Info)
Press the button to display information about the current function. (See page 5.)
When connected to Dolby Atmos®, the LED indicator blinks cyan 3 times.
SOUND MODE

By pressing the button, you can select the desired audio mode. Each time the mode changes, the
Multicolor LED blinks in white.
LED
Indicator
"Adaptive Sound"
• Adaptive Sound
Analyzes the content in real time and automatically provides the optimal sound field based on the
characteristics of the content.
• DTS Virtual:X
Immersive 3D sound from any content.
• Music
Provides more natural and room filling sound for music content.
• Game
Provides stereoscopic sound to immerse you in the action while gaming.
• Standard
Outputs the original sound.
→ →
Red Green Blue Blinks
Pairing
"Ready to connect via Bluetooth."
 "DTS Virtual:X"
White Blinks X1
 "Music"  "Game"
ENG - 10
Cyan Blinks X3
Connection is complete
 "Standard"