Device Description; Application - Beurer MP 42 Instructions For Use Manual

The products demonstrably meet the requirements of
the Technical Regulations of the EAEU.
Do not use the power adapter if
the plug is damaged.

4. DEVICE DESCRIPTION

The associated drawings are shown on page 3.
Manicure/pedicure device
1
Battery level indicator
3
LED light
5

5. APPLICATION

General
• Make sure that the device is switched off beforehand.
• Select the desired attachment part and carefully press it onto the
axle of the device. To remove, pull apart the attachment and the
device in opposing directions.
• Switch on the device by moving the sliding switch down (anti-
clockwise rotation, LED lights up red) or up (clockwise rotation,
LED lights up green).
• You can select the speed of the drive axle using the plus (+) and
minus (-) buttons. Start each application at a low speed and then
increase as required.
• Blue LEDs light up on the surface of the device depending on
the selected speed.
• All filing and callus attachments are coated with a sapphire grain.
This guarantees a long service life and ensures practically no
wear.
+/- speed regulation
2
Clockwise/anti-clockwise
4
rotation / On/off switch
Storage bag
6
22