Led Indicators - Zhone BSX8000 Installation Instructions Manual

LED Indicators

Table 2. LED States and Meanings
LED State
PWR (Power) Solid green
Solid amber
No illumination
OK Pulsing green*
Fan Solid green
Solid amber
Lnk (Link) Solid green
Uplink Ports
Solid amber
and MGMT
No illumination
Act (Activity) Flashing green*
Uplink Ports
and MGMT
Dup (Duplex) Solid green
Uplink Ports
No illumination
and MGMT
[MIM] Lnk Solid green
(Link)
Flashing green*
No illumination
A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid,
*
less constant rate.
BSX8-A2-GZ40-20
Indication
BSX8000-5 uplink module is
receiving power
BSX8000-5 uplink module is
receiving power
No power
BSX8000-5 uplink module is
operational
All fans are functioning
Non-functioning fan
GigE link established
Link established at 10 or
100 Mbps
No link is established
Traffic flowing on link
Full duplex mode
Half duplex mode
MIM-10/100, MIM100F,
MIM-2000F, or MIM-4000F
uplink connection is
established
MIM-2T1 MIM-4T1,
MIM-2E1, or MIM-4E1
uplink connection is
established
No uplink connection is
established
June 2005
Additional Information
Both BLC power terminals are connected.
Only one of the BLC power terminals is
connected.
The BSX8000-5 uplink module is not receiving
power (the BLC may or may not be receiving
power).
All four of the fans on the BLC fan card are
functioning.
At least one of the four fans on the BLC fan card
is no longer functioning.
The MGMT port does not support GigE.
For further information regarding MIM LEDs,
please refer to the corresponding MIM Installation
Instructions.
For further information regarding MIM LEDs,
refer to the corresponding MIM Installation
Instructions.
Applicable to all MIM model types.
13